System integrator · lines · cells · plant software
Automation that keeps the line moving.
We design, build and commission automated production lines, robotic cells and plant software, then stay on call for the next fifteen years.
Lines commissioned
240+
Availability after handover
98.6%
Service desk response
< 2 h
Line 04 · Compressor modules · live view
Running
Shift B · takt 86 s
ST-01
Infeed
Cycle
2.1 s
ST-02
Robot loading
Cycle
12.4 s
ST-03
Vision check
Cycle
0.8 s
ST-04
Torque & fit
Cycle
9.6 s
ST-05
Leak test & pack
Cycle
11.2 s
Cycle time
12.6 s
Units / hour
1,284
First-pass yield
98.9%
PLC & safety programming
Robotic cells
Machine vision
SCADA & MES
Machine retrofit
Panel building
Factory acceptance tests
On-site commissioning
24/7 remote support
01 / Solutions
One integrator, from first sketch to the 3 a.m. phone call.
Specification, mechanical and electrical design, software, robotics, installation and service under one contract. One team owns the line until it performs.
S-01
Line automation
Complete lines and line upgrades: conveyors, stations, controls and the logic that ties them to a single takt.
PLC · Motion · Safety
S-02
Robotic cells
Loading, palletising, welding and assembly cells, simulated first and proven in our hall before they ship.
Simulation · Grippers · Guarding
S-03
Vision & quality
Cameras and sensors that measure every part, reject the bad ones and tell you why.
Inspection · Gauging · Traceability
S-04
Plant software
SCADA, line controllers and machine data delivered to your MES without a science project.
SCADA · OPC UA · MES
S-05
Service & retrofit
New controls for good old machines, spare-part strategies and a service desk that answers at night.
Retrofit · 24/7 desk · Training
Not sure where to start?
Book a two-day line audit. You get a loss map, three ranked improvement options and budget figures.
02 / Method
Five stages. One accountable team.
Every project follows the same route, with a signed gate at the end of each stage. You always know what is finished, what comes next and who owns it.
01
Audit & specification
We map losses on your floor and write a functional specification you can sign.
2–4 weeks
02
Design & simulation
Mechanical, electrical and software design, proven in a digital twin before steel is cut.
4–8 weeks
03
Build & FAT
Cabinets, stations and code built and tested in our hall with your operators present.
6–12 weeks
04
Install & commission
Installation, site acceptance and ramp-up, planned around your production calendar.
1–4 weeks
05
Support & optimise
Service desk, spare-part plan and quarterly OEE reviews for the life of the line.
Ongoing
03 / In numbers
Numbers we are willing to sign.
Measured at handover and twelve months later, written into the contract, reviewed with you every quarter.
240+
lines and cells commissioned since 2004
98.6%
average availability twelve months after handover
< 2 h
first response from the service desk, day or night
14 mo
median payback on robotic cell projects
04 / Industries
Built for plants that run around the clock.
Food lines that wash down every night, automotive suppliers on a fixed launch date, machine shops chasing unattended hours, warehouses that never close.
IND-01
Food & Beverage
Filling, packing and palletising with hygienic design and washdown-rated controls.
IND-02
Automotive & EV
Robot cells and assembly lines for Tier-1 suppliers, battery and e-drive components.
IND-03
Precision Machining
Machine tending, pallet stores and in-process gauging for unattended shifts.
IND-04
Intralogistics
Pallet conveyors, wrapping, AMR handover and the software link to your WMS.
05 / Projects
Before and after, in numbers.
Every project page shows what the line did before we arrived and what it does now. Real constraints, real shutdown windows, real payback.
Consumer Goods
2026
Panel forming line, rebuilt in eleven days
Halvorsen Home Appliances
+23 pts
OEE, 61% to 84%
11 days
planned shutdown
Automotive & EV
2026
Robot cell for battery tray handling
Veltra Mobility
12.4 s
cycle time
2
operators moved to quality roles
Food & Beverage
2025
Filling and capping line for a regional dairy
Alder Creek Dairy
24,000
bottles per hour
−62%
changeover time
06 / Field reports
What plant managers tell their boards.
“They simulated the whole changeover before touching the line. We restarted on day eleven, exactly as planned.”
IS
Ingrid Solberg
Plant Manager, Halvorsen Home Appliances
“The robot cell paid for itself in fourteen months, and the night shift finally stopped calling me.”
RM
Rafael Montoya
Operations Director, Veltra Mobility
“Four machines from four vendors now behave like one line. Changeovers went from forty minutes to fifteen.”
HB
Hannah Brooks
Head of Engineering, Alder Creek Dairy
07 / Questions
What we get asked at the first meeting.
Something else on your mind? A controls engineer, not a sales rep, answers within one working day.
How long does a typical project take?
Do you work with the PLC and robot brands we already use?
Can you install without stopping production?
Who owns the source code?
What happens after handover?
08 / Next step
Your line, running better within one quarter.
A two-day audit on your floor: loss map, three ranked options and honest budget figures. No obligation to build with us.